CIP (Cleaning In Place) cleaning stations are designed for cleaning in a closed circuit the internal surfaces of installations and equipment after production and for preparation of facilities prior to the production Our cleaning stations provide high control of key parameters of the cleaning process, such as time, temperature, concentration and flow. Simultaneously, the stations minimise the loss of detergents by the cleaning phase change, and ensure water savings at the rinsing stage. A programme of the cleaning stations is based on defined individual recipes for each washing circuit, ensuring the repeatability of the cleaning process.
The advantage of the container cleaning stations is their compact design and readiness to work immediately after connecting the utilities (water, steam, condensate, electricity, air), and cleaning tracks. We offer the following options for cleaning stations:
- cleaning using one or two independent tracks
- cleaning in a single phase (acidic agent) or two-phase (alkaline and acidic agent) system
- capacity of containers with cleaning agents of 1,000 or 2,000 litres
- chemical disinfection in a closed circulation
- secondary water tank with a capacity of 2,500 litres for the use of water from the preceding rinsing for the preliminary rinsing in the following cleaning
- cleaning pump capacity up to 30,000 l/h regulated by the speed of the pump or higher on the special order of the Client
- measurement of the pressure on the cleaning circuit supply and the flow enabling to set the nominal and critical values in the cleaning recipes
- tank with the system of the cleaning agent neutralisation before discharging it into drains
- tank with the water heating system for the rinsing of hot cleaning cycles